Makes changing tires a snap. The new shape and surface of the tire lever makes the assembly and disassembly of a tire more enjoyable. For both tires and hands too!

The new tire levers are especially helpful in difficult assembly operations. Clip it onto the rim, to fix the already mounted section of the tire, and it won‘t slide out when the last section is levered onto the rim.

Patent Pending

3 piece set, Art.-No. 1847

The colour blue is a trademark of Park Tool for bicycle tools and is used under license.

With the self-adhesive patches from Schwalbe you can repair a flat tube fast and without any difficulty.

6 Patches, Art.-No. 3900.01
(20 Sets in a display)

Ideally suited for the repair of Aerothan tubes.

Special assembly liquid for bicycle tires. A practical sponge applicator allows the liquid to be applied to the tire bead very simply - without smudging fingers. When inflating, the tire bead slides easily into the correct position on the rim. The liquid evaporates completely after about 10 minutes!

Sponge applicator, 50 ml, Art.-No. 3700
Refill, 1000 ml, Art.-No. 3701

The digital pressure gauge is very precise, measuring pressures up to 11 bar and is suitable for both Auto and Presta valves. It will also function with Schwalbe's 'classic' bicycle valve.

Art.-No. 6010.01

Test tire pressures at least once per month with a pressure gauge. Testing by thumb is completely unreliable as with just half of the required pressure the tire will feel hard. Insufficient air pressure is the most common bicycle problem that results in dramatically increased rolling resistance and premature tire wear.

What is the correct inflation pressure for my tire?

The colour blue is a trademark of Park Tool for bicycle tools and is used under license.

Ideally suited for Tubeless conversions. Produced by Stan’s NoTubes! It can also be used as a puncture protection preventative for bicycle tubes, tubular tires and standard Tubeless systems.

60 ml bottle, Art.-No. 3710.01
200 ml bottle, Art.-No. 3714
500 ml bottle, Art.-No. 3711

APPLICATION: For preventive puncture protection and tubeless conversion. Filling quantities: tires from 23-60mm —> 60-90 ml/tire, from 62-100mm —> 90-120 ml/tire. Shake well! Effective up to 7 months. Unsuitable for significant defects (cuts/bursts). Tubeless conversion only with wheels and tires suitable for tubeless applications.

The tubeless rim tape and valve allows conventional wheels to be sealed and prepared for tubeless use.

The tubeless rim tape is extremely user friendly and at the same time very high pressure resistant. Even on road bikes a single ply of tape is sufficient.

Only use wheels that have been specifically approved by the manufacturer for Tubeless conversion. Especially with the high-pressure demands on race bikes this is very important. Only the wheel maker’s approval ensures that the rim is up to the particular stresses in operation and the tubeless tire will be secure. All important information and advice about Tubeless can be found at: www.schwalbe.com/tubeless

The third important factor - besides tube and tire - for puncture protection. The rim tape effectively protects the tube against mechanical damage, for example from spoke heads and metal burrs around the spoke holes.

Twin Pack

Made from high-quality polyester that is light, yet withstands high pressures. The special adhesive prevents slipping under high loads and temperatures.

Note for all tapes: For racing rims (13C, 14C) use only widths 18 or 19mm!

This economical polyester tape is still available in a 50 m roll.

Note for all tapes: For racing rims (13C, 14C) use only widths 18 or 19mm!

Complete with tube and two tire levers.
Now also for MTB and Touring bikes.

26" (Tube No. SV13), Art.-No. 1653A
28" (Tube No. SV17), Art.-No. 1653B
27.5/29" (Tube No. SV19), Art.-No. 1653C

Roadbike (Tube No. SV15), Art.-No. 1613A.02

Tire Levers: The colour blue is a trademark of Park Tool for bicycle tools and is used under license.

The easy way to inflate tubeless tires.

With the new TIRE BOOSTER, tubeless tire assembly can be accomplished easily. Even without a compressor. With a power of up to eleven bar every tire immediately seats itself safely on the rim and seals everything evenly. If you need an even bigger flow of air, a special adapter is also available. The 435 g light, handy cylinder is the perfect remedy for every tubeless tire assembly, whether at home or on your trips.

How to use the Tire Booster?

Art.-No. 6080.01

Only for SV valves.

- Small pump for emergencies, perfect for jersey pocket or attachment to the frame.
- Handy and extremely durable
- Rubber strap provides protection from dirt

Art. No. 6081

- Super cleaning effect & lasts up to 100 washes.
- Only natural ingredients, biodegradable
- Starter set in can + organic horsehair brush

Starter pack, Art. No. 4715
Soap, Art. No. 4711
Soap can, Art. No. 4713

13 in 1 Multi tool with valve functions. Why does Schwalbe offer a multi tool? Because we wanted to have a handy tool that integrates the functions for valve inserts (SV and AV) and valve extensions. Especially in times of tubeless, puncture protection liquids and screw on air pumps there is more and more need to take out or tighten a valve insert.

We have completely revised the Multitool and added some further, useful tools and functions! 2, 2.5, 3, 4, 5, 6, 8 mm hex 25 mm Torx, slotted screwdriver, SV valve insert, valve extension SV, AV valve core, bottle opener.

78 g, Art.-No. 6015.01

With anti-corrosion coating!

The idea for this special tool comes from the Downhill Worldcup and was then jointly developed with tool manufacturer Unior tools.

The Tread Cutter is the first set of pliers made specifically to fine-tune MTB tires. With it, you can cut the lugs off with a smooth edge and – thanks to the cutting-height adjustment – to your exact required height. The Tread Cutter is designed for absolute fine tuning of a tire tread with the idea to better optimize a tire for exceptional situations.

Art.-No. 6025

Details for use.